CY74FCT2374TSOCE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 250MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 15mA 12mA |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT2374TSOCE4 Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. The package Tubecontains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. There is a trigger configured with Positive Edge. Surface Mountis occupied by this electronic component. The supply voltage is set to 4.75V~5.25V. A temperature of -40°C~85°C TAis used in the operation. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74FCT series. You should not exceed 250MHzin its output frequency. D latch consists of 1 elements. T flip flop consumes 200μA quiescent energy. 20terminations have occurred. It is a member of the 74FCT2374 family. The power supply voltage is 5V. Its input capacitance is 5pFfarads. This D flip flop belongs to the family of FCT. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 20 pins. It has a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. An electronic part with 8bits has been designed. It reaches the maximum supply voltage (Vsup) at 5.25V. For normal operation, the supply voltage (Vsup) should be kept above 4.75V. It runs on 5Vvolts of power. The flip flop contains 2ports. There are 3 output lines on it. It has 8lines.
CY74FCT2374TSOCE4 Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT2374TSOCE4 Applications
There are a lot of Texas Instruments CY74FCT2374TSOCE4 Flip Flops applications.
- ATE
- Storage Registers
- Modulo – n – counter
- Safety Clamp
- Computers
- ESD performance
- EMI reduction circuitry
- Guaranteed simultaneous switching noise level
- Parallel data storage
- Patented noise
