CY74FCT2374TSOCT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 250MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 15mA 12mA |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT2374TSOCT Overview
In the form of 20-SOIC (0.295, 7.50mm Width), it has been packaged. A package named Tape & Reel (TR)includes it. T flip flop uses Tri-State, Non-Invertedas its output configuration. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates with an input voltage of 4.75V~5.25V volts. Temperature is set to -40°C~85°C TA. D-Typeis the type of this D latch. The FPGA belongs to the 74FCT series. Its output frequency should not exceed 250MHz. A total of 1elements are contained within it. As a result, it consumes 200μA of quiescent current without being affected by external factors. A total of 20 terminations have been made. You can search similar parts based on 74FCT2374. It is powered by a voltage of 5V . This T flip flop has a capacitance of 5pF farads at the input. This D flip flop belongs to the family of FCT. Surface Mount mounts this electronic component. 20pins are included in its design. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part with 8bits has been designed. It reaches 5.25Vwhen the maximum supply voltage (Vsup) is applied. It is imperative that the supply voltage (Vsup) is maintained above 4.75Vin order to ensure normal operation. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. It runs on 5Vvolts of power. The flip flop contains 2ports. It is designed with 3 output lines. This input has 8lines.
CY74FCT2374TSOCT Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT2374TSOCT Applications
There are a lot of Texas Instruments CY74FCT2374TSOCT Flip Flops applications.
- Balanced 24 mA output drivers
- Count Modes
- Guaranteed simultaneous switching noise level
- Shift Registers
- Memory
- Buffered Clock
- Data transfer
- Reduced system switching noise
- Pattern generators
- Frequency division
