CY74FCT2573ATPWRE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 76.997305mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74FCT2573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 15mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT2573ATPWRE4 Overview
It is embedded in the 20-TSSOP (0.173, 4.40mm Width) package. It is packaged in the way of Tape & Reel (TR). It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. Based on the way of Surface Mount, this electronic part is mounted. The supply voltage of the device is 4.75V~5.25V. It operates at -40°C~85°C degrees Celsius. The 74FCT series is associated with this FPGA. With this electronic part, there are 8 bits. In this device, there are 20 terminations that have been designed. There is no doubt that it belongs to the family 74FCT2573. In order to function, the supply voltage should be set to 5V. There are 20 pins on it. In terms of electronic devices, this one is in the FCT family. This board has 20 pins on it, which is what it is designed for. A Surface Mount mounting method has been used for this electronic part. In this device, there is a total of 2 ports available for use. In the subcategory FF/Latches, this part belongs. There is a maximum voltage supply (Vsup) that reaches 5.25V. 5V power supplies are needed to operate it. The supply voltage (Vsup) should be greater than 4.75V. Electronic circuits are represented by 8 input lines. Its reliable performance makes it an excellent choice for TAPE AND REEL. As far as external factors are concerned, it consumes 100μA of quiescent current without getting affected by them.
CY74FCT2573ATPWRE4 Features
20-TSSOP (0.173, 4.40mm Width) package
74FCT series
8 Bits
74FCT2573 family
20 pin count
20 pins
5V power supplies
CY74FCT2573ATPWRE4 Applications
There are a lot of Texas Instruments CY74FCT2573ATPWRE4 Latches applications.
- Control circuits
- Decade counting 7-segment decimal display
- Automotive HEV/EV Powertrain
- Serial Input
- Flip-flops
- Phase comparator
- Decade counting
- Automotive Body Electronics
- Frequency
- Counting
