CY74FCT2573CTQCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Weight | 125.786834mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.64mm |
| Base Part Number | 74FCT2573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 12mA |
| Number of Bits | 8 |
| Propagation Delay | 4.7 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 15mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT2573CTQCT Overview
20-SSOP (0.154, 3.90mm Width) contains it. Tape & Reel (TR) is the way in which it is packaged. Tri-State is the output configured for it. In this electrical device, the logic type is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. The voltage supply is 4.75V~5.25V. There is a temperature of -40°C~85°C at which the system operates. This FPGA is part of the 74FCT series. The design of this electronic part contains 8 bits. This device has been designed with 20 terminations available. The family in which it belongs to is 74FCT2573. It operates with a supply voltage of 5V. 20 pins are provided. There is a device in this electronic family called FCT. The pin configuration of the device is 20. Surface Mount is the way in which this electronic part is mounted. In this device, there are 2 ports. It belongs to the subcategory of FF/Latches. There are 5V power supplies attached to it. Electronic circuits are represented by 8 input lines. As a result of its reliable performance, it is well suited for TR. Its 12mA output current allows for maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. There are no external factors that affect it, so it consumes 100μA quiescent current. In order for the device to operate at its maximum power, the maximum power current (ICC) of 0.2mA is needed for operation.
CY74FCT2573CTQCT Features
20-SSOP (0.154, 3.90mm Width) package
74FCT series
8 Bits
74FCT2573 family
20 pin count
20 pins
5V power supplies
CY74FCT2573CTQCT Applications
There are a lot of Texas Instruments CY74FCT2573CTQCT Latches applications.
- Pattern generators
- Four-bit storage with output enable
- Counter timers
- Bus system register with enable parallel lines at bus side
- Parallel data storage
- Parallel-to-Serial Data Conversion
- Automotive Infotainment
- Automatic test equipment
- Pattern Generators
- Multistage ripple counting
