banner_page

CY74FCT2573TSOC

D-Type, Latch 4.75V~5.25V 8 Bits Tri-State Latches 74FCT Series 74FCT2573 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CY74FCT2573TSOC
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 566
  • Description: D-Type, Latch 4.75V~5.25V 8 Bits Tri-State Latches 74FCT Series 74FCT2573 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -40°C~85°C
Packaging Tube
Series 74FCT
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Subcategory FF/Latches
Technology CMOS
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 74FCT2573
Pin Count 20
Qualification Status Not Qualified
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 8:8
Polarity Non-Inverting
Power Supplies 5V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 200μA
Output Current 12mA
Number of Bits 8
Propagation Delay 8 ns
Quiescent Current 100μA
Turn On Delay Time 1.5 ns
Family FCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE WITH SERIES RESISTOR
Current - Output High, Low 15mA 12mA
Logic Type D-Type Transparent Latch
Control Type ENABLE LOW/HIGH
Power Supply Current-Max (ICC) 0.2mA
Number of Output Lines 8
Count Direction UNIDIRECTIONAL
Translation N/A
Height 2.65mm
Length 12.8mm
Width 7.5mm
Thickness 2.35mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CY74FCT2573TSOC Overview


It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. A Tube package is used to package it. In its configuration, Tri-State is used as the output. There is D-Type Transparent Latch logic type for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. The supply voltage of the device is 4.75V~5.25V. The temperature at which the machine is operating is -40°C~85°C. It is a type of FPGA belonging to the 74FCT series. The design of this electronic part contains 8 bits. This device is designed with 20 terminations. It is a member of the 74FCT2573 family. In order to function, the supply voltage should be set to 5V. 20 pins are available on it. It is a member of the FCT family of electronic devices. With the design of the board, there are only 20 pins. Mounting this electronic component follows the Surface Mount method. This device has 2 ports that can be connected to it. The part belongs to the FF/Latches subcategory. The device is powered by 5V power supplies. Its 12mA output current allows for maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. A binary equivalent of the input line is generated by the 8 output lines. As far as external factors are concerned, it consumes 100μA of quiescent current without getting affected by them. The element count is 1. The maximal power current (ICC) supplied for its operation reaches 0.2mA.

CY74FCT2573TSOC Features


20-SOIC (0.295, 7.50mm Width) package
74FCT series
8 Bits
74FCT2573 family
20 pin count
20 pins
5V power supplies
1 elements

CY74FCT2573TSOC Applications


There are a lot of Texas Instruments CY74FCT2573TSOC Latches applications.

  • Parallel Output
  • Automotive Infotainment
  • Avionics
  • Pattern generators
  • TV Set-top Boxes
  • Phase comparator
  • Serial Output Register
  • Communication systems
  • Parallel Input
  • Parallel-to-Serial Data Conversion

Write a review

Note: HTML is not translated!
    Bad           Good