CY74FCT2573TSOCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74FCT2573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 12mA |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 15mA 12mA |
| Logic Type | D-Type Transparent Latch |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Output Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT2573TSOCT Overview
In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. Tape & Reel (TR) is the way in which it is packaged. It is configured with an output of Tri-State. D-Type Transparent Latch is the logic type of this electrical device. Mounting this electronic component follows the Surface Mount method. A 4.75V~5.25V supply voltage is required to operate it. The temperature at which the machine is operating is -40°C~85°C. In the 74FCT series, this FPGA is located. With this electronic part, there are 8 bits. As far as this device is concerned, it has no terminations. The family in which it belongs to is 74FCT2573. The supply voltage of the device is 5V. It has 20 pins that makes it easy to use. It is a member of the FCT family of electronic devices. Designed with 20 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. This device has 2 ports that can be connected to it. There is a subcategory of FF/Latches for this part. A total of 5V power supplies are required for it to operate. Based on its reliable performance, this device is appropriate for TR. With 12mA, maximum design flexibility is ensured. High efficiency requires a voltage supply of 5V. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. It consumes 100μA of quiescent current without being affected by outside factors. There are 1 elements in it. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.2mA.
CY74FCT2573TSOCT Features
20-SOIC (0.295, 7.50mm Width) package
74FCT series
8 Bits
74FCT2573 family
20 pin count
20 pins
5V power supplies
1 elements
CY74FCT2573TSOCT Applications
There are a lot of Texas Instruments CY74FCT2573TSOCT Latches applications.
- General-Purpose Register
- Display
- Flip-flops
- Automotive HEV/EV Powertrain
- A/D converters
- Shift left register
- Frequency
- Counting
- Multistage ripple counting
- Shift right with parallel loading
