CY74FCT2574ATSOC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 12mA |
| Number of Bits | 8 |
| Clock Frequency | 250MHz |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 15mA 12mA |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Max Input Current | 5μA |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT2574ATSOC Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. The package Tubecontains it. Tri-State, Non-Invertedis the output configured for it. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at 4.75V~5.25Vvolts. The operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74FCTseries of FPGAs. A frequency of 250MHzshould not be exceeded by its output. A total of 1 elements are present. As a result, it consumes 200μA of quiescent current without being affected by external factors. There have been 20 terminations. You can search similar parts based on 74FCT2574. A voltage of 5V provides power to the D latch. Its input capacitance is 5pF farads. In terms of electronic devices, this device belongs to the FCTfamily of devices. There is an electronic component mounted in the way of Surface Mount. The 20pins are designed into the board. This device's clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with a number of bits of 8. Due to its superior flexibility, it uses 8 circuits. The power supply is 5V. The D flip flop is embedded with 2ports. Optimal efficiency requires a supply voltage of 5V. In addition to its maximum design flexibility, the output current of the T flip flop is 12mA. It operates with 3 output lines.
CY74FCT2574ATSOC Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT2574ATSOC Applications
There are a lot of Texas Instruments CY74FCT2574ATSOC Flip Flops applications.
- Storage registers
- Buffered Clock
- Memory
- Common Clocks
- EMI reduction circuitry
- Bounce elimination switch
- Automotive
- Communications
- Balanced Propagation Delays
- Supports Live Insertion
