CY74FCT2574TSOCG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT2574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 250MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Current - Output High, Low | 15mA 12mA |
| Max Propagation Delay @ V, Max CL | 6.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
CY74FCT2574TSOCG4 Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. The package Tubecontains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A supply voltage of 4.75V~5.25V is required for operation. Temperature is set to -40°C~85°C TA. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 74FCTseries of FPGAs. A frequency of 250MHzshould be the maximum output frequency. A total of 1 elements are present. It consumes 200μA of quiescent The number of terminations is 20. If you search by 74FCT2574, you will find similar parts. It is powered by a voltage of 5V . JK flip flop input capacitance is 5pF farads. FCTis the family of this D flip flop. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. A Positive Edgeclock edge trigger is used in this device. The RS flip flops belongs to FF/Latches base part number. An electronic part with 8bits has been designed. As soon as 5.25Vis reached, Vsup reaches its maximum value. For normal operation, the supply voltage (Vsup) should be kept above 4.75V. There are 5V power supplies attached to it. The D flip flop is embedded with 2ports. In order for the chip to function, it has 8output lines.
CY74FCT2574TSOCG4 Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT2574TSOCG4 Applications
There are a lot of Texas Instruments CY74FCT2574TSOCG4 Flip Flops applications.
- ESD performance
- Frequency division
- Dynamic threshold performance
- Computing
- Computers
- ESCC
- ATE
- Data storage
- Balanced Propagation Delays
- Convert a momentary switch to a toggle switch
