CY74FCT257ATQCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Weight | 74.502547mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Multiplexer |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT257 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 4 x 2:1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Power Dissipation | 600mW |
| Number of Bits | 2 |
| Throw Configuration | DPST |
| Propagation Delay | 5 ns |
| Quiescent Current | 100μA |
| Family | FCT |
| Logic Function | Multiplexer, Mux |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Supply Type | Single |
| Bandwidth | 70MHz |
| Prop. Delay@Nom-Sup | 7 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT257ATQCT Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 16-SSOP (0.154, 3.90mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.The multiplexers uses an analog IC Multiplexer as the analog part of the circuit.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~85°C.The turn signal switch is designed for use with a 4.75V~5.25V supply voltage, which gives it a lot of flexibility.As a member of 74FCT series, the multiplexers can be used for a wide range of applications.This configuration includes 16 terminations as part of its basic functionality.There is a base part number of 74FCT257 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system works with 5V voltage.This turn signal switch has 16 component pins.It employs GULL WING as the point at which conductors come to an end.The supply type of this multiplexer ic is Single.Currently, it is configured with 16 pins.The mount is in Surface Mount.Among the family of FCT the logic switch is a member.The multiplexer ic provides 2 bits.Normally, 5V is powered by a battery.The turn signal switch has 1 outputs designed for operation.It consumes 100μA current of multiplexer ic since it is not affected by external factors.It has 8 inputs.Currently, the switches is packaged in accordance with the TR method.This turn signal switch's circuit uses 4 transmission channels.
CY74FCT257ATQCT Features
Supplied in the 16-SSOP (0.154, 3.90mm Width) package
Adopting a supply type of Single
Power supplies of 5V
CY74FCT257ATQCT Applications
There are a lot of Texas Instruments CY74FCT257ATQCT Signal Switches / Multiplexers / Decoders applications.
- Seven segment displays
- High-performance memory-decoding applications
- Data communication
- Automatic Monitoring systems
- Implementing boolean functions with multiple variables
- PCIe
- Signal router
- Combinational circuit
- Steel plants
- Code converters
