CY74FCT273CTQCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Weight | 125.786834mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.64mm |
| Base Part Number | 74FCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.8 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 5.8ns @ 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT273CTQCT Overview
The flip flop is packaged in 20-SSOP (0.154, 3.90mm Width). The Tape & Reel (TR)package contains it. It is configured with Non-Invertedas an output. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. With a supply voltage of 4.75V~5.25V volts, it operates. A temperature of -40°C~85°C TAis used in the operation. The type of this D latch is D-Type. JK flip flop is a part of the 74FCTseries of FPGAs. In total, it contains 1 elements. As a result, it consumes 200μA quiescent current and is not affected by external forces. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74FCT273. Power is supplied from a voltage of 5V volts. Input capacitance of this device is 5pF farads. This D flip flop belongs to the family of FCT. Electronic part Surface Mountis mounted in the way. There are 20pins on it. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. The design is based on 8bits. In light of its reliable performance, this T flip flop is well suited for TR. In order for the device to operate, it requires 5V power supplies. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. Its output current of 64mAallows for maximum design flexibility. As of now, there are 8input lines.
CY74FCT273CTQCT Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT273CTQCT Applications
There are a lot of Texas Instruments CY74FCT273CTQCT Flip Flops applications.
- Single Down Count-Control Line
- Functionally equivalent to the MC10/100EL29
- Test & Measurement
- Guaranteed simultaneous switching noise level
- Cold spare funcion
- Count Modes
- Storage registers
- Memory
- Shift registers
- Frequency Divider circuits
