CY74FCT273CTSOCT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.8 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 5.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT273CTSOCT Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). D flip flop is included in the Tape & Reel (TR)package. T flip flop is configured with an output of Non-Inverted. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. A voltage of 4.75V~5.25Vis used as the supply voltage. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74FCT series. A total of 1 elements are present. As a result, it consumes 200μA quiescent current and is not affected by external forces. A total of 20 terminations have been made. If you search by 74FCT273, you will find similar parts. It is powered from a supply voltage of 5V. A JK flip flop with a 5pFfarad input capacitance is used here. It is a member of the FCTfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. A Positive Edgeclock edge trigger is used in this device. The part is included in FF/Latches. 8bits are used in its design. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. A power supply of 5Vis required to operate it. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. The output current of 64mA makes it feature maximum design flexibility. The number of input lines is 8.
CY74FCT273CTSOCT Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT273CTSOCT Applications
There are a lot of Texas Instruments CY74FCT273CTSOCT Flip Flops applications.
- Clock pulse
- Matched Rise and Fall
- Computers
- EMI reduction circuitry
- Data transfer
- Supports Live Insertion
- Storage Registers
- Instrumentation
- Cold spare funcion
- ESD protection
