CY74FCT273TSOC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74FCT273 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 13ns @ 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT273TSOC Overview
20-SOIC (0.295, 7.50mm Width)is the way it is packaged. As part of the package Tube, it is embedded. T flip flop uses Non-Invertedas the output. Positive Edgeis the trigger it is configured with. It is mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. Temperature is set to -40°C~85°C TA. This electronic flip flop is of type D-Type. It is a type of FPGA belonging to the 74FCT series. D latch consists of 1 elements. It consumes 200μA of quiescent current without being affected by external factors. There have been 20 terminations. The object belongs to the 74FCT273 family. Power is provided by a 5V supply. A 5pFfarad input capacitance is provided by this T flip flop. In terms of electronic devices, this device belongs to the FCTfamily of devices. The electronic part is mounted in the way of Surface Mount. This board has 20 pins. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part designed with 8bits is used in this application. It operates from 5V power supplies. In order to ensure high efficiency, the supply voltage should remain at 5V. With an output current of 64mA, it is possible to design the device in any way you want. The number of input lines is 8.
CY74FCT273TSOC Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT273TSOC Applications
There are a lot of Texas Instruments CY74FCT273TSOC Flip Flops applications.
- ESD protection
- Counters
- Balanced 24 mA output drivers
- Consumer
- Parallel data storage
- Frequency Divider circuits
- Modulo – n – counter
- Guaranteed simultaneous switching noise level
- Test & Measurement
- Buffer registers
