Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SSOP (0.154, 3.90mm Width) |
Number of Pins |
20 |
Weight |
125.786834mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Cut Tape (CT) |
Series |
74FCT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.75V~5.25V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.64mm |
Base Part Number |
74FCT373 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
200μA |
Output Current |
64mA |
Number of Bits |
8 |
Propagation Delay |
8.5 ns |
Quiescent Current |
100μA |
Turn On Delay Time |
2 ns |
Family |
FCT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
32mA 64mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.064 A |
Control Type |
ENABLE LOW/HIGH |
Power Supply Current-Max (ICC) |
0.2mA |
Number of Output Lines |
8 |
Count Direction |
UNIDIRECTIONAL |
Translation |
N/A |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.9mm |
Thickness |
1.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY74FCT373ATQCT Overview
In the 20-SSOP (0.154, 3.90mm Width) package, it can be found as an embedded module. Cut Tape (CT) is the way in which it is packaged. There is a Tri-State output configured. In this electrical device, the logic type is D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. A 4.75V~5.25V supply voltage is required to operate it. It operates at -40°C~85°C degrees Celsius. The 74FCT series contains FPGAs of this type. Electronic parts with 8 bits are designed for this application. This device is designed with 20 terminations. 74FCT373 is the family name of it. The device works with a voltage of 5V for its supply voltage. The device is equipped with 20 pins. This electronic device belongs to the family of FCT. This board has 20 pins on it, which is what it is designed for. Surface Mount is the method used for mounting this electronic part. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. FF/Latches is the subcategory of this part. The system is powered by 5V sources. The reliability of this device makes it well suited to TR. With an output current of 64mA, it is highly flexible in terms of design. High efficiency requires a supply voltage of 5V. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. There are no external factors that affect it, so it consumes 100μA quiescent current. This element consists of 1. Maximum power supply (ICC) for its operation is 0.2mA.
CY74FCT373ATQCT Features
20-SSOP (0.154, 3.90mm Width) package
74FCT series
8 Bits
74FCT373 family
20 pin count
20 pins
5V power supplies
1 elements
CY74FCT373ATQCT Applications
There are a lot of Texas Instruments CY74FCT373ATQCT Latches applications.
- High-speed logic
- Lamp and Display (LED)
- Hammer Device Information
- Serial Output Register
- Buffer Storage
- Shift register
- Watches
- Pattern generators
- Decade counting 7-segment decimal display
- A/D and D/A conversion