CY74FCT373ATQCTE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Weight | 125.786834mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.64mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT373ATQCTE4 Overview
In the 20-SSOP (0.154, 3.90mm Width) package, it can be found as an embedded module. A package of Tape & Reel (TR) has been used. Tri-State is the output configured for it. There is D-Type Transparent Latch logic type for this electrical device. This electronic part is mounted in the way of Surface Mount. A 4.75V~5.25V voltage supply is required for operation. There is a temperature of -40°C~85°C at which the system operates. 74FCT is the series number of this FPGA. The design of this electronic part contains 8 bits. This device is designed with 20 terminations. It belongs to 74FCT373 family. The device is operated when the supply voltage is set to 5V. The device is equipped with 20 pins. FCT is the family of this electronic device. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted using the Surface Mount method. This device has 2 ports. This part can be found within the FF/Latches subcategory. The system is powered by 5V sources. Input Lines consist of electronic circuits, and there are 8. Based on its reliable performance, this device is well suited to TR. The output current of 64mA makes it feature maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. It consumes 100μA of quiescent current without being affected by outside factors. When the maximum power current (ICC) is supplied for its operation, it reaches 0.2mA.
CY74FCT373ATQCTE4 Features
20-SSOP (0.154, 3.90mm Width) package
74FCT series
8 Bits
74FCT373 family
20 pin count
20 pins
5V power supplies
CY74FCT373ATQCTE4 Applications
There are a lot of Texas Instruments CY74FCT373ATQCTE4 Latches applications.
- Frequency
- Decade counting
- Parallel data synchronization
- Address register
- Pseudo-random code generators
- Counter control
- Automatic test equipment
- PCs and Notebooks
- Bus system register with enable parallel lines at bus side
- Counters
