CY74FCT373ATSOCG4
| Parameters | |
|---|---|
| Weight | 500.709277mg |
| Packaging | Rail/Tube |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 20 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Current - Output | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| High Level Output Current | -32mA |
| Low Level Output Current | 32mA |
| Number of Input Lines | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 20 |
CY74FCT373ATSOCG4 Overview
The SOIC package contains it. Packaged in the way of Rail/Tube. An electronic part with 8 bits is designed. This device is designed with 20 terminations. The device works with a voltage of 5V for its supply voltage. The 20 pind are equipped with it. FCT is the family name of this electronic device. 20 pins are used in its design. Surface Mount is the way in which this electronic part is mounted. This device has 2 ports on board, which are all available at the same time. The part belongs to the FF/Latches subcategory. The device is powered by 5V power supplies. Input Lines consist of electronic circuits, and there are 8. In order to achieve high efficiency, the supply voltage should be kept at 5V. It consists of 1 elements. There is 32mA output current at the low level. In the high level output current, the value is set to -32mA. The operating temperature should be lower than 85°C. Temperatures higher than -40°C should be used for operation. 5.25V is the maximum voltage it supports. A voltage of 4.75V is the minimum supply voltage required for it to operate. As for the logic IC it uses, it is a BUS DRIVER. The output current of this device is 64mA, which makes it a very flexible design element.
CY74FCT373ATSOCG4 Features
SOIC package
8 Bits
20 pin count
20 pins
5V power supplies
1 elements
CY74FCT373ATSOCG4 Applications
There are a lot of Texas Instruments CY74FCT373ATSOCG4 Latches applications.
- Instrumentation
- Hammer
- BCD counting
- Shift right with parallel loading
- Counter
- Bus system register with enable parallel lines at bus side
- Shift Registers
- Frequency
- Lamp and Display (LED)
- Meter applications
