Parameters |
Current - Output High, Low |
32mA 64mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.064 A |
Independent Circuits |
1 |
Number of Output Lines |
8 |
Height Seated (Max) |
2.65mm |
Width |
7.5mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SOIC (0.295, 7.50mm Width) |
Number of Pins |
20 |
Operating Temperature |
-40°C~85°C |
Packaging |
Tube |
Series |
74FCT |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
Subcategory |
FF/Latches |
Technology |
CMOS |
Voltage - Supply |
4.75V~5.25V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
74FCT373 |
Pin Count |
20 |
Qualification Status |
Not Qualified |
Output Type |
Tri-State |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Supply Voltage-Max (Vsup) |
5.25V |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4.75V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
200μA |
Output Current |
64mA |
Number of Bits |
8 |
Propagation Delay |
4.7 ns |
Quiescent Current |
100μA |
Turn On Delay Time |
2 ns |
Family |
FCT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
CY74FCT373CTSOCE4 Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). A package of Tube has been used. In this configuration, the output is set to Tri-State. A D-Type Transparent Latch logic type is used in this electrical device. The electronic component is mounted according to the Surface Mount method. There is no supply voltage for this device. A temperature of -40°C~85°C is set as the operating temperature. The 74FCT series of FPGAs is the one this FPGA belongs to. 8 Bits are used in the design of this electronic part. This device is designed with 20 terminations. This type belongs to the 74FCT373 family. In order to function, the supply voltage should be set to 5V. There are 20 pins attached to it. This electronic device belongs to the family of FCT. This board has 20 pins on it, which is what it is designed for. A Surface Mount mounting method has been used for this electronic part. This device is equipped with 2 ports. It belongs to the subcategory of FF/Latches. The maximal supply voltage (Vsup) reaches 5.25V. A total of 5V power supplies are required for it to operate. Ensure that the supply voltage (Vsup) is greater than 4.75V. With an output current of 64mA, it is highly flexible in terms of design. It follows that 8 output lines are generated from the binary equivalent of the input line. Without external influences, it consumes 100μA of quiescent current.
CY74FCT373CTSOCE4 Features
20-SOIC (0.295, 7.50mm Width) package
74FCT series
8 Bits
74FCT373 family
20 pin count
20 pins
5V power supplies
CY74FCT373CTSOCE4 Applications
There are a lot of Texas Instruments CY74FCT373CTSOCE4 Latches applications.
- Ring counter
- Multi-line decoders
- Decade counting
- BCD counting
- Automotive HEV/EV Powertrain
- Hammer
- Parallel Output
- Instrumentation
- Frequency dividing
- Shift right with parallel loading