CY74FCT373CTSOCG4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 4.7 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
CY74FCT373CTSOCG4 Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. It is packaged in the way of Tube. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. The electronic component is mounted according to the Surface Mount method. A voltage of 4.75V~5.25V is used as the supply voltage for this device. During operation, the temperature is set at -40°C~85°C. There are a number of FPGAs in this series, including this one. There are 8 bits in this electronic part. In this device, there are 20 terminations that have been designed. It belongs to 74FCT373 family. In order to function, the supply voltage should be set to 5V. 20 pins are included. There is a device in this electronic family called FCT. The device has 20 pins. Mounting this electronic component follows the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Subcategory FF/Latches contains this part. 5.25V is the maximum voltage (Vsup) that can be supplied. The system is powered by 5V sources. If the supply voltage (Vsup) is greater than 4.75V, then the device is working correctly. The 64mA output current gives it maximum design flexibility. 8 output lines provide binary equivalents of input lines.
CY74FCT373CTSOCG4 Features
20-SOIC (0.295, 7.50mm Width) package
74FCT series
8 Bits
74FCT373 family
20 pin count
20 pins
5V power supplies
CY74FCT373CTSOCG4 Applications
There are a lot of Texas Instruments CY74FCT373CTSOCG4 Latches applications.
- Multi-line decoders
- Pattern generators
- Frequency
- Buffer/Storage Registers
- A/D and D/A conversion
- Digital bus buffer
- BCD counting
- Instrumentation
- Sample and hold register
- Up-Down Johnson
