CY74FCT373CTSOCTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT373 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 4.7 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT373CTSOCTE4 Overview
There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). As a result, it has a packaging of Tape & Reel (TR). Tri-State is used for the output it is configured with. There is a logic type of D-Type Transparent Latch for this electrical device. Electronic components are mounted using the Surface Mount method. It operates with a supply voltage of 4.75V~5.25V. A temperature of -40°C~85°C is set as the operating temperature. 74FCT is the series number of this FPGA. It is designed with 8 bits. As far as this device is concerned, it has no terminations. It belongs to 74FCT373 family. The device is operated when the supply voltage is set to 5V. There are 20 pins attached to it. In terms of electronic devices, this one is in the FCT family. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there are 2 ports. There is a subcategory of FF/Latches for this part. It reaches a maximum supply voltage (Vsup) of 5.25V. The device is powered by 5V power supplies. There should be a voltage supply (Vsup) greater than 4.75V. Based on its reliable performance, this device is appropriate for TAPE AND REEL. It features maximum flexibility in design due to 64mA output current. 8 output lines provide binary equivalents of input lines. It consumes 100μA of quiescent current without being affected by external factors.
CY74FCT373CTSOCTE4 Features
20-SOIC (0.295, 7.50mm Width) package
74FCT series
8 Bits
74FCT373 family
20 pin count
20 pins
5V power supplies
CY74FCT373CTSOCTE4 Applications
There are a lot of Texas Instruments CY74FCT373CTSOCTE4 Latches applications.
- Shift left with parallel loading
- Display driver
- TV Set-top Boxes
- Frequency
- Bus system register with enable parallel lines at bus side
- Sample and hold register
- Storage
- BCD counting
- Control circuits
- Multistage ripple counting
