CY74FCT374ATQCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Weight | 125.786834mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.64mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.2ns @ 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT374ATQCT Overview
20-SSOP (0.154, 3.90mm Width)is the way it is packaged. Package Cut Tape (CT)embeds it. There is a Tri-State, Non-Invertedoutput configured with it. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.75V~5.25V. It is operating at a temperature of -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. FPGAs belonging to the 74FCTseries contain this type of chip. The element count is 1 . During its operation, it consumes 200μA quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. You can search similar parts based on 74FCT374. The power supply voltage is 5V. The input capacitance of this JK flip flopis 5pF farads. FCTis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Positive Edge. There is a base part number Bus Driver/Transceiverfor the RS flip flops. The flip flop is designed with 8bits. The superior flexibility is achieved through the use of 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. The D latch operates on 5V volts. A D flip flop with 2embedded ports is available. If high efficiency is desired, the supply voltage should be kept at 5V. The 64mA output current allows it to be designed with the greatest amount of flexibility. In order for the chip to function, it has 3output lines. We are able to achieve a frequency of 250MHz.
CY74FCT374ATQCT Features
Cut Tape (CT) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT374ATQCT Applications
There are a lot of Texas Instruments CY74FCT374ATQCT Flip Flops applications.
- Consumer
- Communications
- QML qualified product
- Circuit Design
- Bus hold
- Computers
- Divide a clock signal by 2 or 4
- High Performance Logic for test systems
- Frequency Divider circuits
- Matched Rise and Fall
