CY74FCT374ATSOC
| Parameters | |
|---|---|
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 250MHz |
| Base Part Number | 74FCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.5ns @ 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
CY74FCT374ATSOC Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. As configured, the output uses Tri-State, Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at a voltage of 4.75V~5.25V. A temperature of -40°C~85°C TAis used in the operation. D-Typeis the type of this D latch. In FPGA terms, D flip flop is a type of 74FCTseries FPGA. The list contains 1 elements. During its operation, it consumes 200μA quiescent energy. Currently, there are 20 terminations. It is a member of the 74FCT374 family. It is powered by a voltage of 5V . Input capacitance of this device is 5pF farads. It is a member of the FCTfamily of D flip flop. There is an electronic part mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. This part is included in Bus Driver/Transceiver. It is designed with a number of bits of 8. Its flexibility is enhanced by 8 circuits. The D latch runs on a voltage of 5V volts. This D flip flop is equipped with 0 ports. High efficiency requires the supply voltage to be maintained at 5V. The output current of 64mA makes it feature maximum design flexibility. In order for the chip to function, it has 3output lines. It is possible to achieve a frequency of 250MHz.
CY74FCT374ATSOC Features
Tube package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT374ATSOC Applications
There are a lot of Texas Instruments CY74FCT374ATSOC Flip Flops applications.
- Counters
- Differential Individual
- Bus hold
- Count Modes
- Dynamic threshold performance
- Instrumentation
- Digital electronics systems
- Patented noise
- 2 – Bit synchronous counter
- Buffer registers
