CY74FCT374CTSOCT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Clock Frequency | 250MHz |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT374CTSOCT Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. There is an embedded version in the package Tape & Reel (TR). In the configuration, Tri-State, Non-Invertedis used as the output. This trigger uses the value Positive Edge. Surface Mountis occupied by this electronic component. It operates with a supply voltage of 4.75V~5.25V. The operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74FCTseries FPGA. Its output frequency should not exceed 250MHz. A total of 1elements are present in it. It consumes 200μA of quiescent current without being affected by external factors. It has been determined that there have been 20 terminations. The 74FCT374 family contains it. The power source is powered by 5V. Input capacitance of this device is 5pF farads. FCTis the family of this D flip flop. It is mounted by the way of Surface Mount. There are 20pins on it. This device has the clock edge trigger type of Positive Edge. The part is included in FF/Latches. 8bits are used in its design. Its flexibility is enhanced by 8 circuits. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. The D latch runs on a voltage of 5V volts. This D flip flop is equipped with 0 ports. If high efficiency is desired, the supply voltage should be kept at 5V. With a current output of 64mA , it offers maximum design flexibility. In order for the chip to function, it has 3output lines.
CY74FCT374CTSOCT Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT374CTSOCT Applications
There are a lot of Texas Instruments CY74FCT374CTSOCT Flip Flops applications.
- Clock pulse
- Frequency Divider circuits
- Shift registers
- Data storage
- Power down protection
- Registers
- Balanced 24 mA output drivers
- Counters
- Single Down Count-Control Line
- CMOS Process
