CY74FCT377ATQCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Weight | 125.786834mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.64mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT377 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 7.2 ns |
| Quiescent Current | 200μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 7.2ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT377ATQCT Overview
It is packaged in the way of 20-SSOP (0.154, 3.90mm Width). Package Tape & Reel (TR)embeds it. T flip flop uses Non-Invertedas its output configuration. This trigger uses the value Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 4.75V~5.25Vis required for its operation. The operating temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74FCTseries of FPGAs. D latch consists of 1 elements. 20terminations have occurred. This D latch belongs to the family of 74FCT377. A voltage of 5V is used to power it. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. A device of this type belongs to the family of FCT. It is mounted by the way of Surface Mount. This board is designed with 20pins on it. In this device, the clock edge trigger type is Positive Edge. It is included in FF/Latches. An electronic part designed with 8bits is used in this application. As a result of its reliable performance, this T flip flop is suitable for TR. A power supply of 5Vis required to operate it. For high efficiency, the supply voltage should be kept at 5V. The 64mA output current allows it to be designed with the greatest amount of flexibility. As of now, there are 8input lines. This D latch consumes 200μA quiescent current at all.
CY74FCT377ATQCT Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT377ATQCT Applications
There are a lot of Texas Instruments CY74FCT377ATQCT Flip Flops applications.
- Dynamic threshold performance
- Modulo – n – counter
- Latch-up performance
- ATE
- Bounce elimination switch
- QML qualified product
- High Performance Logic for test systems
- Reduced system switching noise
- Single Down Count-Control Line
- CMOS Process
