CY74FCT377TQCT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Weight | 125.786834mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT377 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 13ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 8 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT377TQCT Overview
The item is packaged in 20-SSOP (0.154, 3.90mm Width)cases. You can find it in the Tape & Reel (TR)package. In the configuration, Non-Invertedis used as the output. In the configuration of the trigger, Positive Edgeis used. Surface Mountis occupied by this electronic component. A voltage of 4.75V~5.25Vis required for its operation. Currently, the operating temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. It belongs to the 74FCTseries of FPGAs. In total, there are 1 elements. T flip flop consumes 200μA quiescent energy. The number of terminations is 20. Members of the 74FCT377family make up this object. Power is supplied from a voltage of 5V volts. The input capacitance of this JK flip flopis 5pF farads. In terms of electronic devices, this device belongs to the FCTfamily of devices. This electronic part is mounted in the way of Surface Mount. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. An electronic part designed with 8bits is used in this application. Vsup reaches 5.25V, the maximal supply voltage. Normal operation requires a supply voltage (Vsup) above 4.75V. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. The power supply is 5V. The number of input lines is 8.
CY74FCT377TQCT Features
Tape & Reel (TR) package
74FCT series
8 Bits
5V power supplies
CY74FCT377TQCT Applications
There are a lot of Texas Instruments CY74FCT377TQCT Flip Flops applications.
- Shift registers
- Consumer
- Computers
- Memory
- Latch-up performance
- Modulo – n – counter
- Set-reset capability
- Balanced 24 mA output drivers
- Storage Registers
- Automotive
