Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
20-SSOP (0.154, 3.90mm Width) |
Number of Pins |
20 |
Weight |
125.786834mg |
Operating Temperature |
-40°C~85°C |
Packaging |
Tape & Reel (TR) |
Series |
74FCT |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
20 |
ECCN Code |
EAR99 |
Subcategory |
FF/Latches |
Packing Method |
TR |
Technology |
CMOS |
Voltage - Supply |
4.75V~5.25V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Terminal Pitch |
0.64mm |
Base Part Number |
74FCT573 |
Pin Count |
20 |
Output Type |
Tri-State |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Circuit |
8:8 |
Polarity |
Non-Inverting |
Power Supplies |
5V |
Load Capacitance |
50pF |
Number of Ports |
2 |
Nominal Supply Current |
200μA |
Output Current |
64mA |
Number of Bits |
8 |
Propagation Delay |
8.5 ns |
Quiescent Current |
100μA |
Turn On Delay Time |
2 ns |
Family |
FCT |
Logic Function |
D-Type, Latch |
Output Characteristics |
3-STATE |
Current - Output High, Low |
32mA 64mA |
Logic Type |
D-Type Transparent Latch |
Max I(ol) |
0.064 A |
Control Type |
COMMON CONTROL |
Power Supply Current-Max (ICC) |
0.2mA |
Number of Output Lines |
8 |
Count Direction |
BIDIRECTIONAL |
Height |
1.75mm |
Length |
8.65mm |
Width |
3.9mm |
Thickness |
1.5mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY74FCT573ATQCT Overview
The 20-SSOP (0.154, 3.90mm Width) package contains it. Tape & Reel (TR) is the way in which it is packaged. In this configuration, the output is set to Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Mounting this electronic component follows the Surface Mount method. It operates with a supply voltage of 4.75V~5.25V. There is -40°C~85°C operating temperature. In the 74FCT series, this FPGA is located. Electronic parts with 8 bits are designed for this application. In this device, there are 20 terminations that have been designed. This type belongs to the 74FCT573 family. A 5V voltage supply is required for operation. The 20 pind are equipped with it. In the world of electronics, this electronic device belongs to the family of FCT. This board has 20 pins on it, which is what it is designed for. Mounting this electronic component follows the Surface Mount method. In this device, there are 2 ports. This part is included in FF/Latches. A total of 5V power supplies are required for it to operate. Its reliable performance makes it an excellent choice for TR. Due to its 64mA output current, it offers maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. 8 output lines provide binary equivalents of input lines. It consumes 100μA of quiescent current without being affected by outside factors. A total of 1 elements are contained in it. Maximum power supply (ICC) for its operation is 0.2mA.
CY74FCT573ATQCT Features
20-SSOP (0.154, 3.90mm Width) package
74FCT series
8 Bits
74FCT573 family
20 pin count
20 pins
5V power supplies
1 elements
CY74FCT573ATQCT Applications
There are a lot of Texas Instruments CY74FCT573ATQCT Latches applications.
- Buffer register
- Parallel data storage
- Stacked or Push-Down Registers
- General-Purpose Register
- Counter control
- Shift right register
- PCs and Notebooks
- Parallel data synchronization
- Counter timers
- Audio and video switching