banner_page

CY74FCT573ATQCTE4

D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS SSOP


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CY74FCT573ATQCTE4
  • Package: SSOP
  • Datasheet: -
  • Stock: 536
  • Description: D-Type, Latch 8 Bits Latches 20 Pins DUAL CMOS SSOP(Kg)

Details

Tags

Parameters
Contact Plating Gold
Mount Surface Mount
Package / Case SSOP
Number of Pins 20
Weight 125.786834mg
Packaging Tape and Reel
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 2
Number of Terminations 20
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Subcategory FF/Latches
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.635mm
Pin Count 20
Operating Supply Voltage 5V
Number of Elements 1
Polarity Non-Inverting
Power Supplies 5V
Temperature Grade INDUSTRIAL
Max Supply Voltage 5.25V
Min Supply Voltage 4.75V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 200μA
Current - Output 64mA
Number of Bits 8
Propagation Delay 8.5 ns
Quiescent Current 100μA
Turn On Delay Time 2 ns
Family FCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
Max I(ol) 0.064 A
High Level Output Current -32mA
Low Level Output Current 32mA
Number of Input Lines 8
Width 3.9mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

CY74FCT573ATQCTE4 Overview


In the SSOP package, it is embedded. A package of Tape and Reel has been used. With this electronic part, there are 8 bits. In this device, there are 20 terminations. The device works with a voltage of 5V for its supply voltage. There are 20 pins attached to it. It is a member of the FCT family of electronic devices. With the design of the board, there are only 20 pins. It is mounted according to the Surface Mount method. This device is equipped with 2 ports. FF/Latches is the subcategory of this part. The system is powered by 5V sources. It consists of 8 input lines from which an electronic circuit can be built. For maximum efficiency, the supply voltage should be set to 5V. It consumes 100μA current from its quiescent state without being affected by external factors at all. There are 1 elements in it. 32mA is the low level output current. It is set to zero for the high level output current. A temperature below 85°C should be used for operation. -40°C is the minimum operating temperature. There is a maximum voltage of 5.25V supported. A voltage of 4.75V is the minimum supply voltage required for it to operate. A logic IC that is used in this application is BUS DRIVER. With 64mA, maximum design flexibility is ensured.

CY74FCT573ATQCTE4 Features


SSOP package
8 Bits
20 pin count
20 pins
5V power supplies
1 elements

CY74FCT573ATQCTE4 Applications


There are a lot of Texas Instruments CY74FCT573ATQCTE4 Latches applications.

  • Hammer Device Information
  • Display
  • Counting
  • Audio and video switching
  • Hammer
  • Ring counter
  • PCs and Notebooks
  • Pseudo-random code generators
  • Lamp and Display (LED)
  • Parallel-to-Serial Data Conversion

Write a review

Note: HTML is not translated!
    Bad           Good