CY74FCT573CTSOC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74FCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 4.7 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Output Lines | 3 |
| Count Direction | BIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT573CTSOC Overview
There is an embedded version of it in package 20-SOIC (0.295, 7.50mm Width). Packaged in the way of Tube. It uses Tri-State as the output. This electrical device has the logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A 4.75V~5.25V voltage supply is required for operation. A temperature of -40°C~85°C is used for operation. The 74FCT series contains FPGAs of this type. The design of this electronic part is based on 8 bits. In this device, there are 20 terminations that have been designed. As a member of the 74FCT573 family, it falls under that category. With the supply voltage set at 5V, it is able to operate. 20 pins are included. This electronic device is categorized as a FCT electronic device. It is designed with 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This part can be found within the FF/Latches subcategory. 5V power supplies are needed to operate it. With 64mA, maximum design flexibility is ensured. In order to achieve high efficiency, the supply voltage should be kept at 5V. It follows that 3 output lines are generated from the binary equivalent of the input line. As far as external factors are concerned, it consumes 100μA of quiescent current without getting affected by them. A total of 1 elements are contained in it. A maximal power current (ICC) is generated for its operation at 0.2mA.
CY74FCT573CTSOC Features
20-SOIC (0.295, 7.50mm Width) package
74FCT series
8 Bits
74FCT573 family
20 pin count
20 pins
5V power supplies
1 elements
CY74FCT573CTSOC Applications
There are a lot of Texas Instruments CY74FCT573CTSOC Latches applications.
- Phase comparator
- Bus system register with enable parallel lines at bus side
- Digital bus buffer
- Buffer Storage
- Counting
- Multi-line decoders
- Parallel data synchronization
- Decade counting
- Counter control
- Watches
