CY74FCT573CTSOCG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74FCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 4.7 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Output Lines | 8 |
| Count Direction | BIDIRECTIONAL |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT573CTSOCG4 Overview
The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). Packaged in the way of Tube. Tri-State is used for the output it is configured with. There is a logic type of D-Type Transparent Latch for this electrical device. Mounting this electronic component follows the Surface Mount method. A 4.75V~5.25V voltage supply is required for operation. It operates at -40°C~85°C degrees Celsius. In the 74FCT series, this FPGA is located. There are 8 bits in this electronic part. In this device, there are 20 terminations that have been designed. The family 74FCT573 includes it. The device works with a voltage of 5V for its supply voltage. 20 pins are included. FCT is the family of this electronic device. Designed with 20 pins, it is compatible with a wide range of devices. Surface Mount is used to mount this electronic part. In this device, there is a total of 2 ports available for use. This part is included in FF/Latches. 5V power supplies are needed to operate it. The output current of 64mA makes it feature maximum design flexibility. Optimal efficiency requires 5V as the supply voltage. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. A total of 1 elements make up this object. As its maximal power current (ICC) reaches 0.2mA, it is able to operate.
CY74FCT573CTSOCG4 Features
20-SOIC (0.295, 7.50mm Width) package
74FCT series
8 Bits
74FCT573 family
20 pin count
20 pins
5V power supplies
1 elements
CY74FCT573CTSOCG4 Applications
There are a lot of Texas Instruments CY74FCT573CTSOCG4 Latches applications.
- Relay replacement
- Synchronous frequency dividers
- Automotive Cluster
- Hammer
- Pattern generators
- Ring counter
- Parallel Input
- A/D and D/A conversion
- Relay
- Multistage ripple counting
