banner_page

CY74FCT573CTSOCT

D-Type, Latch 4.75V~5.25V 8 Bits Tri-State Latches 74FCT Series 74FCT573 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-CY74FCT573CTSOCT
  • Package: 20-SOIC (0.295, 7.50mm Width)
  • Datasheet: -
  • Stock: 833
  • Description: D-Type, Latch 4.75V~5.25V 8 Bits Tri-State Latches 74FCT Series 74FCT573 20 Pins DUAL CMOS 20-SOIC (0.295, 7.50mm Width)(Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SOIC (0.295, 7.50mm Width)
Number of Pins 20
Weight 500.709277mg
Operating Temperature -40°C~85°C
Packaging Tape & Reel (TR)
Series 74FCT
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Subcategory FF/Latches
Packing Method TAPE AND REEL
Technology CMOS
Voltage - Supply 4.75V~5.25V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 5V
Base Part Number 74FCT573
Pin Count 20
Output Type Tri-State
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 5.25V
Power Supplies 5V
Supply Voltage-Min (Vsup) 4.75V
Load Capacitance 50pF
Number of Ports 2
Nominal Supply Current 200μA
Output Current 64mA
Number of Bits 8
Propagation Delay 4.7 ns
Quiescent Current 100μA
Turn On Delay Time 2 ns
Family FCT
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 32mA 64mA
Logic Type D-Type Transparent Latch
Max I(ol) 0.064 A
Independent Circuits 1
Number of Output Lines 8
Height Seated (Max) 2.65mm
Width 7.5mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CY74FCT573CTSOCT Overview


It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. This package has the format of Tape & Reel (TR). It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch for this electrical device. Based on the way of Surface Mount, this electronic part is mounted. In order for it to operate, it needs a supply voltage of 4.75V~5.25V. During operation, the temperature is set at -40°C~85°C. There are a number of FPGAs in this series, including this one. It is designed with 8 bits. This device is designed with 20 terminations. The family in which it belongs to is 74FCT573. The supply voltage of the device is 5V. The 20 pind are equipped with it. FCT is the family name of this electronic device. This board has 20 pins on it, which is what it is designed for. Surface Mount is used to mount this electronic part. In this device, there are 2 ports. The part is in the FF/Latches subcategory. It reaches a maximum supply voltage (Vsup) of 5.25V. It operates from 5V power supplies. It is recommended to have a higher supply voltage (Vsup) than 4.75V. Considering the reliability of this device, it would be a good candidate for TAPE AND REEL. As the output current is 64mA, the design flexibility is maximum. It follows that 8 output lines are generated from the binary equivalent of the input line. As far as external factors are concerned, it consumes 100μA of quiescent current without getting affected by them.

CY74FCT573CTSOCT Features


20-SOIC (0.295, 7.50mm Width) package
74FCT series
8 Bits
74FCT573 family
20 pin count
20 pins
5V power supplies

CY74FCT573CTSOCT Applications


There are a lot of Texas Instruments CY74FCT573CTSOCT Latches applications.

  • Audio and video switching
  • Decade counting 7-segment decimal display
  • Serial Output Register
  • Hammer
  • Display
  • A/D converters
  • Storage
  • Digital bus buffer
  • Four-bit storage with output enable
  • Parallel data synchronization

Write a review

Note: HTML is not translated!
    Bad           Good