CY74FCT573CTSOCTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74FCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 4.7 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT573CTSOCTE4 Overview
A package called 20-SOIC (0.295, 7.50mm Width) contains it. Tape & Reel (TR) is the way it is packaged. Tri-State is the output configured for it. This electrical device has a logic type of D-Type Transparent Latch. Based on the way of Surface Mount, this electronic part is mounted. With a supply voltage of 4.75V~5.25V, it operates. It is -40°C~85°C at the operating temperature. It is a type of FPGA belonging to the 74FCT series. 8 Bits are used in the design of this electronic part. The device consists of 20 terminations that are designed to be used in conjunction with it. There is no doubt that it belongs to the family 74FCT573. It operates with a supply voltage of 5V. 20 pins are available on it. FCT is the family name of this electronic device. This board has 20 pins on it, which is what it is designed for. Electronic parts are mounted using the Surface Mount method. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. There is a subcategory of FF/Latches for this part. It is possible to reach 5.25V when the maximum supply voltage (Vsup) has been reached. The device is powered by 5V power supplies. There should be a voltage supply (Vsup) greater than 4.75V. The reliability of this device makes it well suited to TAPE AND REEL. Due to its 64mA output current, it offers maximum design flexibility. There are 8 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. There are no external factors that affect it, so it consumes 100μA quiescent current.
CY74FCT573CTSOCTE4 Features
20-SOIC (0.295, 7.50mm Width) package
74FCT series
8 Bits
74FCT573 family
20 pin count
20 pins
5V power supplies
CY74FCT573CTSOCTE4 Applications
There are a lot of Texas Instruments CY74FCT573CTSOCTE4 Latches applications.
- Multistage ripple counting
- Communication systems
- Hammer Device Information
- Shift Registers
- Watches
- Data acquisition
- Automotive Body Electronics
- Shift right with parallel loading
- Shift left register
- Storage
