CY74FCT573TQCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Weight | 125.786834mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.64mm |
| Base Part Number | 74FCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 13 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Control Type | COMMON CONTROL |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Output Lines | 8 |
| Count Direction | BIDIRECTIONAL |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT573TQCT Overview
In the 20-SSOP (0.154, 3.90mm Width) package, it is embedded. Tape & Reel (TR) is the way it is packaged. Tri-State is used for the output it is configured with. A D-Type Transparent Latch logic type is used in this electrical device. Surface Mount is used to mount this electronic part. It operates at a voltage of 4.75V~5.25V. A temperature of -40°C~85°C is set as the operating temperature. An FPGA of this type belongs to the 74FCT series. With this electronic part, there are 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. As a member of the 74FCT573 family, it falls under that category. With a supply voltage of 5V, it operates. 20 pins are provided. It is a member of the FCT family of electronic devices. The device has 20 pins. Mounting this electronic component follows the Surface Mount method. This device has 2 ports on board, which are all available at the same time. Subcategory FF/Latches contains this part. The system is powered by 5V sources. Its reliable performance makes it an excellent choice for TR. The output current of 64mA makes it feature maximum design flexibility. For maximum efficiency, the supply voltage should be set to 5V. 8 output lines provide binary equivalents of input lines. There are no external factors that affect it, so it consumes 100μA quiescent current. There are 1 elements in it. There is a limit on the maximal power current (ICC) supplied by the device for operation that reaches 0.2mA.
CY74FCT573TQCT Features
20-SSOP (0.154, 3.90mm Width) package
74FCT series
8 Bits
74FCT573 family
20 pin count
20 pins
5V power supplies
1 elements
CY74FCT573TQCT Applications
There are a lot of Texas Instruments CY74FCT573TQCT Latches applications.
- Buffer/Storage Registers
- Display driver
- Frequency
- Automotive Cluster
- Multi-line decoders
- High-speed logic
- Automotive HEV/EV Powertrain
- Phase comparator
- Stacked or Push-Down Registers
- Accumulator Registers
