CY74FCT573TSOCT
| Parameters | |
|---|---|
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74FCT573 |
| Pin Count | 20 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 8 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Number of Output Lines | 8 |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
CY74FCT573TSOCT Overview
It is embedded in the 20-SOIC (0.295, 7.50mm Width) package. It is packaged in the way of Tape & Reel (TR). It uses Tri-State as its output configuration. The Logic type of this electrical device is D-Type Transparent Latch. This electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.75V~5.25V, it operates. A temperature of -40°C~85°C is set as the operating temperature. 74FCT is the series number of this FPGA. An electronic part with 8 bits is designed. This device has been designed with 20 terminations available. The family in which it belongs to is 74FCT573. With the supply voltage set at 5V, it is able to operate. The 20 pind are equipped with it. In terms of electronic devices, this one is in the FCT family. The device has 20 pins. Surface Mount is the way in which this electronic part is mounted. There are 2 ports, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The part belongs to the FF/Latches subcategory. There are 5V power supplies required for this machine to operate. The reliability of this device makes it well suited to TAPE AND REEL. As the output current is 64mA, the design flexibility is maximum. The supply voltage should be maintained at 5V for high efficiency. The binary equivalent of the input line is generated by 8 output lines. There are no external factors that affect it, so it consumes 100μA quiescent current. A total of 1 elements make up this object.
CY74FCT573TSOCT Features
20-SOIC (0.295, 7.50mm Width) package
74FCT series
8 Bits
74FCT573 family
20 pin count
20 pins
5V power supplies
1 elements
CY74FCT573TSOCT Applications
There are a lot of Texas Instruments CY74FCT573TSOCT Latches applications.
- Clocks
- High-speed logic
- Four-bit storage with output enable
- Frequency dividing
- Automatic test equipment
- Automotive HEV/EV Powertrain
- Programmable binary
- PCs and Notebooks
- Up/down difference counting
- Display
