CY74FCT574ATQCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Weight | 125.786834mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | Bus Driver/Transceiver |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.64mm |
| Frequency | 250MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 6.5 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6.2ns @ 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT574ATQCT Overview
In the form of 20-SSOP (0.154, 3.90mm Width), it has been packaged. As part of the package Cut Tape (CT), it is embedded. It is configured with Tri-State, Non-Invertedas an output. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates at 4.75V~5.25Vvolts. In the operating environment, the temperature is -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. The FPGA belongs to the 74FCT series. A total of 1elements are present in it. Despite external influences, it consumes 200μAof quiescent current. There have been 20 terminations. It is a member of the 74FCT574 family. An input voltage of 5Vpowers the D latch. This T flip flop has a capacitance of 5pF farads at the input. It is a member of the FCTfamily of D flip flop. The electronic part is mounted in the way of Surface Mount. A total of 20pins are provided on this board. The clock edge trigger type for this device is Positive Edge. There is a Bus Driver/Transceiverbase part number assigned to the RS flip flops. There are 8bits in its design. Due to its superior flexibility, it uses 8 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. It runs on 5Vvolts of power. This flip flop has a total of 2ports. If high efficiency is desired, the supply voltage should be kept at 5V. The 64mA output current allows it to be designed with the greatest amount of flexibility. In order to operate, the chip has 3 output lines. It is possible to achieve a frequency of 250MHz.
CY74FCT574ATQCT Features
Cut Tape (CT) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT574ATQCT Applications
There are a lot of Texas Instruments CY74FCT574ATQCT Flip Flops applications.
- Storage registers
- Supports Live Insertion
- Memory
- Cold spare funcion
- Data storage
- Parallel data storage
- CMOS Process
- Modulo – n – counter
- Data transfer
- Test & Measurement
