CY74FCT574CTQCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 20 |
| Weight | 125.786834mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.64mm |
| Frequency | 250MHz |
| Base Part Number | 74FCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 5.2 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 5.2ns @ 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT574CTQCT Overview
The item is packaged in 20-SSOP (0.154, 3.90mm Width)cases. You can find it in the Tape & Reel (TR)package. It is configured with Tri-State, Non-Invertedas an output. Positive Edgeis the trigger it is configured with. There is an electric part mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. A temperature of -40°C~85°C TAis considered to be the operating temperature. This electronic flip flop is of type D-Type. It belongs to the 74FCTseries of FPGAs. D latch consists of 1 elements. As a result, it consumes 200μA quiescent current and is not affected by external forces. It has been determined that there have been 20 terminations. The 74FCT574 family contains it. The power supply voltage is 5V. This JK flip flop has a 5pFfarad input capacitance. In terms of electronic devices, this device belongs to the FCTfamily of devices. Electronic part Surface Mountis mounted in the way. It is designed with 20 pins. Its clock edge trigger type is Positive Edge. It is part of the FF/Latchesbase part number family. This flip flop is designed with 8 Bits. Despite its superior flexibility, it relies on 8 circuits to achieve it. Considering its reliability, this T flip flop is well suited for TR. The system runs on a power supply of 5V watts. This flip flop has a total of 2ports. For high efficiency, the supply voltage should be set to 5V. Featuring the maximum design flexibility, it has an output current of 64mA . There are no output lines on the JK flip flop. The frequency that can be achieved is 250MHz.
CY74FCT574CTQCT Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT574CTQCT Applications
There are a lot of Texas Instruments CY74FCT574CTQCT Flip Flops applications.
- Common Clocks
- Communications
- Counters
- Divide a clock signal by 2 or 4
- Control circuits
- Data transfer
- Memory
- Safety Clamp
- Dynamic threshold performance
- Storage Registers
