CY74FCT574TSOCTE4
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT574 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 2 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT574TSOCTE4 Overview
20-SOIC (0.295, 7.50mm Width)is the packaging method. It is contained within the Tape & Reel (TR)package. Tri-State, Non-Invertedis the output configured for it. JK flip flop uses Positive Edgeas the trigger. Surface Mountis occupied by this electronic component. The JK flip flop operates at 4.75V~5.25Vvolts. In the operating environment, the temperature is -40°C~85°C TA. D-Typeis the type of this D latch. It belongs to the 74FCTseries of FPGAs. In total, it contains 1 elements. As a result, it consumes 200μA of quiescent current without being affected by external factors. The number of terminations is 20. You can search similar parts based on 74FCT574. It is powered by a voltage of 5V . Its input capacitance is 5pF farads. The electronic device belongs to the FCTfamily. There is an electronic component mounted in the way of Surface Mount. It is designed with 20 pins. A Positive Edgeclock edge trigger is used in this device. It is included in FF/Latches. There are 8bits in its design. Vsup reaches its maximum value at 5.25V. Keeping the supply voltage (Vsup) above 4.75V is necessary for normal operation. The superior flexibility of this product is achieved by using 8 circuits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. An electrical current of 5V volts is applied to it. This flip flop has a total of 2ports. It has 3 output lines to operate.
CY74FCT574TSOCTE4 Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
CY74FCT574TSOCTE4 Applications
There are a lot of Texas Instruments CY74FCT574TSOCTE4 Flip Flops applications.
- Supports Live Insertion
- ATE
- 2 – Bit synchronous counter
- High Performance Logic for test systems
- Differential Individual
- Data Synchronizers
- Parallel data storage
- Frequency Divider circuits
- Balanced Propagation Delays
- ESCC
