CY74FCT821ATSOCE4
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SOIC |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 24 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TUBE |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 24 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 64mA |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 6 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 10 |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
CY74FCT821ATSOCE4 Overview
SOICis the way it is packaged. The element count is 1 . Currently, there are 24 terminations. A voltage of 5V is used as the power supply for this D latch. Devices in the FCTfamily are electronic devices. There is an electronic component mounted in the way of Surface Mount. The 24pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. This device has the base part number FF/Latches. Due to its reliability, this T flip flop is well suited for TUBE. A power supply of 5Vis required to operate it. The flip flop has 2ports embedded within it. For high efficiency, the supply voltage should be set to 5V. A -32mAis set for the high level output current. 64mAis set as the low level output current. Ideally, the operating temperature should be below 85°C. Temperatures above -40°Cshould be used. Normally, it operates with a voltage of 4.75VV as its minimum supply voltage. In this case, it supports a maximum supply voltage of 5.25V. The logic IC it uses is BUS DRIVER. It has 1 functions. There are 24 pins on the D latch. With an output current of 64mA, this flip flop offers maximum design flexibility.
CY74FCT821ATSOCE4 Features
24 pins
5V power supplies
1 Functions
24 pin count
CY74FCT821ATSOCE4 Applications
There are a lot of Texas Instruments CY74FCT821ATSOCE4 Flip Flops applications.
- EMI reduction circuitry
- Load Control
- CMOS Process
- Patented noise
- ESCC
- Guaranteed simultaneous switching noise level
- Shift registers
- Data transfer
- Balanced 24 mA output drivers
- Individual Asynchronous Resets
