CY74FCT821ATSOCT
| Parameters | |
|---|---|
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 6 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 20ns @ 5V, 300pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 10 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT821 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
CY74FCT821ATSOCT Overview
24-SOIC (0.295, 7.50mm Width)is the packaging method. The package Tape & Reel (TR)contains it. It is configured with Tri-State, Non-Invertedas an output. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. A voltage of 4.75V~5.25Vis required for its operation. Currently, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 74FCT series. There are 1 elements in it. As a result, it consumes 200μA quiescent current and is not affected by external forces. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74FCT821. A voltage of 5V is used to power it. This JK flip flop has a 5pFfarad input capacitance. It is a member of the FCTfamily of D flip flop. The electronic part is mounted in the way of Surface Mount. This board has 24 pins. This device has Positive Edgeas its clock edge trigger type. This part is included in FF/Latches. Flip flops designed with 10bits are used in this part. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. A total of 5V power supplies are needed to run it. The flip flop has 2embedded ports. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. With a current output of 64mA , it offers maximum design flexibility. The number of input lines is 10.
CY74FCT821ATSOCT Features
Tape & Reel (TR) package
74FCT series
24 pins
10 Bits
5V power supplies
CY74FCT821ATSOCT Applications
There are a lot of Texas Instruments CY74FCT821ATSOCT Flip Flops applications.
- Single Down Count-Control Line
- Cold spare funcion
- Data storage
- ATE
- High Performance Logic for test systems
- QML qualified product
- Dynamic threshold performance
- Power down protection
- Supports Live Insertion
- Divide a clock signal by 2 or 4
