CY74FCT821BTPC
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Weight | 1.753503g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | Bus Driver/Transceiver |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74FCT821 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 6 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6ns @ 50pF |
| Prop. Delay@Nom-Sup | 7.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 10 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 5.08mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT821BTPC Overview
The flip flop is packaged in a case of 24-DIP (0.300, 7.62mm). It is included in the package Tube. T flip flop is configured with an output of Tri-State, Non-Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Through Hole. A voltage of 4.75V~5.25Vis used as the supply voltage. It is operating at a temperature of -40°C~85°C TA. It is an electronic flip flop with the type D-Type. In FPGA terms, D flip flop is a type of 74FCTseries FPGA. In total, there are 1 elements. There is a consumption of 200μAof quiescent energy. A total of 24terminations have been recorded. It is a member of the 74FCT821 family. Power is provided by a 5V supply. A 5pFfarad input capacitance is provided by this T flip flop. FCTis the family of this D flip flop. Through Hole mounts this electronic component. This board is designed with 24pins on it. In this device, the clock edge trigger type is Positive Edge. This part is included in Bus Driver/Transceiver. An electronic part with 10bits has been designed. An electrical current of 5V volts is applied to it. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. High efficiency requires the supply voltage to be maintained at 5V. With a current output of 64mA , it offers maximum design flexibility. In order for the chip to function, it has 3output lines. There are 10 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
CY74FCT821BTPC Features
Tube package
74FCT series
24 pins
10 Bits
5V power supplies
CY74FCT821BTPC Applications
There are a lot of Texas Instruments CY74FCT821BTPC Flip Flops applications.
- Single Up Count-Control Line
- Memory
- Automotive
- Control circuits
- Buffered Clock
- Bounce elimination switch
- Set-reset capability
- Single Down Count-Control Line
- Synchronous counter
- Balanced 24 mA output drivers
