CY74FCT821BTSOCE4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT821 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 6 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 15ns @ 5V, 300pF |
| Prop. Delay@Nom-Sup | 7.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Input Lines | 10 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Max Frequency@Nom-Sup | 83300000Hz |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT821BTSOCE4 Overview
The item is packaged in 24-SOIC (0.295, 7.50mm Width)cases. The package Tubecontains it. Currently, the output is configured to use Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Surface Mount. It operates with a supply voltage of 4.75V~5.25V. Temperature is set to -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74FCTseries of FPGAs. In total, it contains 1 elements. It consumes 200μA of quiescent current without being affected by external factors. There have been 24 terminations. D latch belongs to the 74FCT821 family. An input voltage of 5Vpowers the D latch. Its input capacitance is 5pF farads. It belongs to the family of electronic devices known as FCT. This electronic part is mounted in the way of Surface Mount. The 24pins are designed into the board. Its clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. It is designed with a number of bits of 10. The power supply is 5V. The flip flop contains 2ports. In order to achieve high efficiency, the supply voltage should be maintained at 5V. As a result of its output current of 64mA, it is very flexible in terms of design. There are 10 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
CY74FCT821BTSOCE4 Features
Tube package
74FCT series
24 pins
10 Bits
5V power supplies
CY74FCT821BTSOCE4 Applications
There are a lot of Texas Instruments CY74FCT821BTSOCE4 Flip Flops applications.
- Computers
- ATE
- Single Up Count-Control Line
- Common Clocks
- QML qualified product
- Reduced system switching noise
- Supports Live Insertion
- Buffered Clock
- Dynamic threshold performance
- Test & Measurement
