CY74FCT821BTSOCT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT821 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 15 ns |
| Turn On Delay Time | 6 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 15ns @ 5V, 300pF |
| Prop. Delay@Nom-Sup | 7.5 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 10 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 83300000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
CY74FCT821BTSOCT Overview
The item is packaged in 24-SOIC (0.295, 7.50mm Width)cases. As part of the package Tape & Reel (TR), it is embedded. T flip flop is configured with an output of Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 4.75V~5.25Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. FPGAs belonging to the 74FCTseries contain this type of chip. D latch consists of 1 elements. It consumes 200μA of quiescent It has been determined that there have been 24 terminations. D latch belongs to the 74FCT821 family. The power source is powered by 5V. This T flip flop has a capacitance of 5pF farads at the input. In terms of electronic devices, this device belongs to the FCTfamily of devices. There is an electronic component mounted in the way of Surface Mount. This board is designed with 24pins on it. This device has Positive Edgeas its clock edge trigger type. This part is included in FF/Latches. It is designed with 10bits. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. A power supply of 5Vis required to operate it. A total of 2ports are embedded in the D flip flop. The supply voltage should be maintained at 5V for high efficiency. As a result of its output current of 64mA, it is very flexible in terms of design. This input has 10lines in it.
CY74FCT821BTSOCT Features
Tape & Reel (TR) package
74FCT series
24 pins
10 Bits
5V power supplies
CY74FCT821BTSOCT Applications
There are a lot of Texas Instruments CY74FCT821BTSOCT Flip Flops applications.
- ESD protection
- Consumer
- Guaranteed simultaneous switching noise level
- Buffered Clock
- Frequency Dividers
- Patented noise
- Individual Asynchronous Resets
- Test & Measurement
- Memory
- Bounce elimination switch
