CY74FCT823ATSOCTE4
| Parameters | |
|---|---|
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT823 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 9 |
| Propagation Delay | 20 ns |
| Turn On Delay Time | 6 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 20ns @ 5V, 300pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 9 |
| Clock Edge Trigger Type | Positive Edge |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
CY74FCT823ATSOCTE4 Overview
It is embeded in 24-SOIC (0.295, 7.50mm Width) case. Package Tape & Reel (TR)embeds it. This output is configured with Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~85°C TA. D-Typeis the type of this D latch. It belongs to the 74FCTseries of FPGAs. The list contains 1 elements. It consumes 200μA of quiescent Currently, there are 24 terminations. D latch belongs to the 74FCT823 family. It is powered by a voltage of 5V . There is 5pF input capacitance for this T flip flop. Devices in the FCTfamily are electronic devices. The electronic part is mounted in the way of Surface Mount. 24pins are included in its design. This device's clock edge trigger type is Positive Edge. It is included in FF/Latches. It is designed with a number of bits of 9. There is a 5.25Vmaximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 4.75V. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. The power supply is 5V. The flip flop has 2embedded ports. As of now, there are 9input lines.
CY74FCT823ATSOCTE4 Features
Tape & Reel (TR) package
74FCT series
24 pins
9 Bits
5V power supplies
CY74FCT823ATSOCTE4 Applications
There are a lot of Texas Instruments CY74FCT823ATSOCTE4 Flip Flops applications.
- Matched Rise and Fall
- Differential Individual
- Count Modes
- Safety Clamp
- Patented noise
- ATE
- QML qualified product
- Supports Live Insertion
- ESCC
- Control circuits
