CY74FCT823CTQCT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Base Part Number | 74FCT823 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 9 |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 6 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 12.5ns @ 5V, 300pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 9 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 83300000Hz |
| Length | 8.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT823CTQCT Overview
24-SSOP (0.154, 3.90mm Width)is the packaging method. You can find it in the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A supply voltage of 4.75V~5.25V is required for operation. It is at -40°C~85°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 74FCTseries of FPGAs. D latch consists of 1 elements. During its operation, it consumes 200μA quiescent energy. 24terminations have occurred. Members of the 74FCT823family make up this object. An input voltage of 5Vpowers the D latch. JK flip flop input capacitance is 5pF farads. It belongs to the family of electronic devices known as FCT. Surface Mount mounts this electronic component. 24pins are included in its design. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. The design is based on 9bits. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. A total of 2ports are embedded in the D flip flop. In order to achieve high efficiency, the supply voltage should be maintained at 5V. With a current output of 64mA , it offers maximum design flexibility. As of now, there are 9input lines.
CY74FCT823CTQCT Features
Tape & Reel (TR) package
74FCT series
24 pins
9 Bits
5V power supplies
CY74FCT823CTQCT Applications
There are a lot of Texas Instruments CY74FCT823CTQCT Flip Flops applications.
- Count Modes
- Consumer
- CMOS Process
- Data Synchronizers
- Modulo – n – counter
- Instrumentation
- ESCC
- Memory
- Buffer registers
- Divide a clock signal by 2 or 4
