CY74FCT823CTSOCT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 74FCT823 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 9 |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 6 ns |
| Family | FCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 12.5ns @ 5V, 300pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Number of Input Lines | 9 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 83300000Hz |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
CY74FCT823CTSOCT Overview
24-SOIC (0.295, 7.50mm Width)is the way it is packaged. It is included in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas the output. This trigger is configured to use Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. The operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. It is a type of FPGA belonging to the 74FCT series. In total, it contains 1 elements. As a result, it consumes 200μA quiescent current. There have been 24 terminations. The 74FCT823family includes it. The D flip flop is powered by a voltage of 5V . Its input capacitance is 5pF farads. FCTis the family of this D flip flop. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 24. Its clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It is designed with 9bits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. The flip flop contains 2ports. High efficiency requires the supply voltage to be maintained at 5V. With a current output of 64mA , it offers maximum design flexibility. This input has 9lines in it.
CY74FCT823CTSOCT Features
Tape & Reel (TR) package
74FCT series
24 pins
9 Bits
5V power supplies
CY74FCT823CTSOCT Applications
There are a lot of Texas Instruments CY74FCT823CTSOCT Flip Flops applications.
- Clock pulse
- Data transfer
- Balanced Propagation Delays
- Data Synchronizers
- Matched Rise and Fall
- Convert a momentary switch to a toggle switch
- EMI reduction circuitry
- Buffer registers
- Automotive
- Supports Live Insertion
