CY74FCT825CTQCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.64mm |
| Base Part Number | 74FCT825 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 64mA |
| Number of Bits | 8 |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 6 ns |
| Family | FCT |
| Current - Quiescent (Iq) | 200μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Max I(ol) | 0.064 A |
| Max Propagation Delay @ V, Max CL | 6ns @ 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 5pF |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Input Lines | 8 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Thickness | 1.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT825CTQCT Overview
It is packaged in the way of 24-SSOP (0.154, 3.90mm Width). D flip flop is included in the Tape & Reel (TR)package. This output is configured with Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.75V~5.25V volts. Currently, the operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. The FPGA belongs to the 74FCT series. The element count is 1 . This process consumes 200μA quiescents. There are 24 terminations,Members of the 74FCT825family make up this object. Power is provided by a 5V supply. The input capacitance of this JK flip flopis 5pF farads. This D flip flop belongs to the family of FCT. In this case, the electronic component is mounted in the way of Surface Mount. This board is designed with 24pins on it. A Positive Edgeclock edge trigger is used in this device. It is part of the FF/Latchesbase part number family. It is designed with 8bits. In view of its reliability, this D flip flop is a good fit for TR. In order for the device to operate, it requires 5V power supplies. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. In order to achieve high efficiency, the supply voltage should be maintained at 5V. The output current of 64mA makes it feature maximum design flexibility. It has 8lines.
CY74FCT825CTQCT Features
Tape & Reel (TR) package
74FCT series
24 pins
8 Bits
5V power supplies
CY74FCT825CTQCT Applications
There are a lot of Texas Instruments CY74FCT825CTQCT Flip Flops applications.
- Patented noise
- Pattern generators
- Differential Individual
- Single Down Count-Control Line
- Load Control
- Individual Asynchronous Resets
- Frequency division
- Computers
- Buffered Clock
- Balanced Propagation Delays
