CY74FCT825CTQCTG4
| Parameters | |
|---|---|
| Number of Terminations | 24 |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Current - Output | 64mA |
| Propagation Delay | 12.5 ns |
| Turn On Delay Time | 6 ns |
| Family | FCT |
| Logic Function | D-Type |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| High Level Output Current | -32mA |
| Low Level Output Current | 64mA |
| Clock Edge Trigger Type | Positive Edge |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Package / Case | SSOP |
| Number of Pins | 24 |
| Weight | 129.500622mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 2 |
CY74FCT825CTQCTG4 Overview
SSOPis the way it is packaged. There are 1 elements in it. In 24terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The D flip flop is powered by a voltage of 5V . FCTis the family of this D flip flop. It is mounted in the way of Surface Mount. There are 24pins on it. This device has the clock edge trigger type of Positive Edge. The part is included in FF/Latches. As a result of its reliability, this D flip flop is ideally suited for TAPE AND REEL. An electrical current of 5V volts is applied to it. The flip flop contains 2ports. If high efficiency is desired, the supply voltage should be kept at 5V. A high level output current of -32mAis set. In the low level output current setting, the current is set to 64mA. There should be a temperature below 85°Cduring operation. It is recommended that the operating temperature is higher than -40°C. In order for it to operate, a supply voltage of 4.75Vis required. It supports the maximal supply voltage of 5.25V. BUS DRIVERis the logic IC it uses. A total of 1 functions are available on the T flip flop. This device is equipped with a pin count of 24. In addition to its maximum design flexibility, the output current of the flip flop is 64mA.
CY74FCT825CTQCTG4 Features
24 pins
5V power supplies
1 Functions
24 pin count
CY74FCT825CTQCTG4 Applications
There are a lot of Texas Instruments CY74FCT825CTQCTG4 Flip Flops applications.
- Load Control
- Matched Rise and Fall
- Computing
- Safety Clamp
- Memory
- EMI reduction circuitry
- Parallel data storage
- Instrumentation
- Modulo – n – counter
- Storage Registers
