CY74FCT841ATSOC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 624.398247mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74FCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Base Part Number | 74FCT841 |
| Pin Count | 24 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 10:10 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Nominal Supply Current | 200μA |
| Output Current | 64mA |
| Number of Bits | 10 |
| Propagation Delay | 13 ns |
| Quiescent Current | 100μA |
| Turn On Delay Time | 1.5 ns |
| Family | FCT |
| Logic Function | D-Type, Latch |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Logic Type | D-Type Transparent Latch |
| Max I(ol) | 0.064 A |
| Prop. Delay@Nom-Sup | 9 ns |
| Control Type | ENABLE LOW/HIGH |
| Power Supply Current-Max (ICC) | 0.2mA |
| Number of Output Lines | 10 |
| Count Direction | UNIDIRECTIONAL |
| Translation | N/A |
| Height | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY74FCT841ATSOC Overview
In the package 24-SOIC (0.295, 7.50mm Width), it can be found. Packaged in the way of Tube. It uses the output configuration Tri-State. There is a logic type of D-Type Transparent Latch associated with this electrical device. A Surface Mount mount is used for mounting this electronic part. It operates with a supply voltage of 4.75V~5.25V. A temperature of -40°C~85°C is used for operation. 74FCT is the series number of this FPGA. An electronic part with 10 bits is designed. This device is designed with 24 terminations. This type belongs to the 74FCT841 family. With the supply voltage set at 5V, it is able to operate. There are 24 pins attached to it. This electronic device is categorized as a FCT electronic device. There are 24 pins on it. Surface Mount is used to mount this electronic part. This device has 2 ports. FF/Latches is the subcategory of this part. 5V power supplies are needed to operate it. The 64mA output current gives it maximum design flexibility. In order to achieve high efficiency, the supply voltage should be kept at 5V. There are 10 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. The current consumed by the device is 100μA volts in quiescent mode, which cannot be affected by external factors. A total of 1 elements make up this object. As its maximal power current (ICC) reaches 0.2mA, it is able to operate.
CY74FCT841ATSOC Features
24-SOIC (0.295, 7.50mm Width) package
74FCT series
10 Bits
74FCT841 family
24 pin count
24 pins
5V power supplies
1 elements
CY74FCT841ATSOC Applications
There are a lot of Texas Instruments CY74FCT841ATSOC Latches applications.
- Shift Registers
- Watches
- Decade counting 7-segment decimal display
- Shift register
- Parallel Output
- Multi-line decoders
- Meter applications
- Shift left with parallel loading
- TV Set-top Boxes
- Flip-flops
