banner_page

CY7B9910-5SXC

5V Fanout Buffer (Distribution), Zero Delay Buffer 80MHz CY7B9910 Clock Generators 24 Pins 24-SOIC (0.295, 7.50mm Width) 24 Terminals Surface Mount 4.5V~5.5V Tube


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY7B9910-5SXC
  • Package: 24-SOIC (0.295, 7.50mm Width)
  • Datasheet: PDF
  • Stock: 503
  • Description: 5V Fanout Buffer (Distribution), Zero Delay Buffer 80MHz CY7B9910 Clock Generators 24 Pins 24-SOIC (0.295, 7.50mm Width) 24 Terminals Surface Mount 4.5V~5.5V Tube (Kg)

Details

Tags

Parameters
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 24-SOIC (0.295, 7.50mm Width)
Number of Pins 24
Operating Temperature 0°C~70°C
Packaging Tube
Published 2007
JESD-609 Code e3
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 24
Type Fanout Buffer (Distribution), Zero Delay Buffer
Terminal Finish Matte Tin (Sn)
Technology BICMOS
Voltage - Supply 4.5V~5.5V
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Time@Peak Reflow Temperature-Max (s) 20
Base Part Number CY7B9910
Output TTL
Pin Count 24
Number of Outputs 8
Operating Supply Voltage 5V
Power Supplies 5V
Number of Circuits 1
Nominal Supply Current 85mA
Power Dissipation 78mW
Frequency (Max) 80MHz
Family 7B
Input Clock
Ratio - Input:Output 1:8
Max I(ol) 0.046 A
PLL Yes
Differential - Input:Output No/No
Prop. Delay@Nom-Sup 0.5 ns
Propagation Delay (tpd) 0.5 ns
Same Edge Skew-Max (tskwd) 0.5 ns
Duty Cycle 50 %
Height Seated (Max) 2.667mm
Width 7.5057mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

CY7B9910-5SXC Overview


Tube-method packaging is used for clock ICs. The 24-SOIC (0.295, 7.50mm Width) package contains this clock generator. Under reflowing process, this clock generator ic is able to sustain a maximum temperature of 260. It contains a total of 24 terminations within RF synthesizer. The supply voltage of 5V allows for high efficiency. This Clock PLL will be fed by Clock as its input. A total of 1 circuits are implemented to access the full performance of the electrical part. It provides a maximum frequency of 80MHz. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock generators should operate with the voltage supply of 4.5V~5.5V. Based on the test statistics, an ambient temperature of 0°C~70°C should be set. In this case, we are dealing with a frequency synthesizer that can be used with TTL logic levels. Fanout Buffer (Distribution), Zero Delay Buffer is the type of electrical part that this component is classified as. An IC that generates clocks specifically for microprocessors, this clock PLL is 24-bits in si24e. It is possible to find its related electronic parts by searching for the base part number CY7B9910. There are 24 pins that are available on the frequency generator. PLL clock can handle a voltage of 5V as its supply voltage. 8 signal outputs maximi8e the output frequency. At maximum 0.5 ns, this analog clock generator has low timing skew. By searching for parts that belong to the 7B family, you can find electronic parts that are similar.

CY7B9910-5SXC Features


Available in the 24-SOIC (0.295, 7.50mm Width)
Supply voltage of 5V
Operating supply voltage of 5V

CY7B9910-5SXC Applications


There are a lot of Cypress Semiconductor Corp CY7B9910-5SXC Clock Generators applications.

  • Wide area power system
  • Various decoding circuits
  • Deep space exploration
  • Multiplexing communication
  • Bluetooth transmitters
  • Set-top boxes
  • Automatic control system test
  • Phase modulation cellular systems
  • Frequency shifting decodes
  • Mechanical devices

Write a review

Note: HTML is not translated!
    Bad           Good