CY7B9910-5SXI
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | Fanout Buffer (Distribution), Zero Delay Buffer |
| Terminal Finish | Matte Tin (Sn) |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY7B9910 |
| Output | TTL |
| Pin Count | 24 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Number of Circuits | 1 |
| Nominal Supply Current | 90mA |
| Power Dissipation | 78mW |
| Frequency (Max) | 80MHz |
| Family | 7B |
| Input | Clock |
| Ratio - Input:Output | 1:8 |
| Max I(ol) | 0.046 A |
| PLL | Yes |
| Differential - Input:Output | No/No |
| Prop. Delay@Nom-Sup | 0.5 ns |
| Propagation Delay (tpd) | 0.5 ns |
| Same Edge Skew-Max (tskwd) | 0.5 ns |
| Duty Cycle | 50 % |
| Height Seated (Max) | 2.667mm |
| Width | 7.5055mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
CY7B9910-5SXI Overview
Clock ICs are packaged using the Tube method. There is a clock generator embedded in the 24-SOIC (0.295, 7.50mm Width) package. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. In it, there are 24 terminations to be found. Basically, this time clock generator needs a voltage of 5V. There is a Clock PLL called Clock which is designed to be the input to this clock generator. For a full understanding of the electronic part's performance, 1 circuits are implemented. This clock-based frequency generator provides a frequency up to 80MHz Max. Because of the Surface Mount, clock PLL can be easily mounted on the panel. This clock PLL works with a supply voltage of 4.5V~5.5V. The temperature should be set at -40°C~85°C to ensure reliable performance. TTL is designed for clock generator's output. Fanout Buffer (Distribution), Zero Delay Buffer is the type of electrical part that this component is classified as. The clock-generating IC is a 24-bit device designed specifically for microprocessors. The related electrical components for the base part number CY7B9910 can be found below. The clock PLL has 24 pins that are available. There is a maximum supply voltage of 5V that clock generator can handle. 8 signal outputs allow for maximi8ation of output frequency. At maximum 0.5 ns, this analog clock generator has low timing skew. When searching for electrical components belonging to the 7B family, similar parts can be found.
CY7B9910-5SXI Features
Available in the 24-SOIC (0.295, 7.50mm Width)
Supply voltage of 5V
Operating supply voltage of 5V
CY7B9910-5SXI Applications
There are a lot of Cypress Semiconductor Corp CY7B9910-5SXI Clock Generators applications.
- FMCW Radar
- Mixed mode (analog and digital) applications
- Time to digital converters
- Bit synchronization
- Aerospace and defense
- VSAT (Small Ground Satellite Station)
- Coherent carrier tracking
- Microwave radio
- Smartphones
- Line cards used in telephone exchange
