Parameters |
Contact Plating |
Gold, Tin |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
24-SOIC (0.295, 7.50mm Width) |
Number of Pins |
24 |
Operating Temperature |
0°C~70°C |
Packaging |
Tube |
Published |
2010 |
JESD-609 Code |
e3 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
24 |
Type |
Fanout Buffer (Distribution), Zero Delay Buffer |
Terminal Finish |
Matte Tin (Sn) |
Technology |
BICMOS |
Voltage - Supply |
4.5V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
5V |
Reach Compliance Code |
unknown |
Base Part Number |
CY7B9910 |
Output |
TTL |
Pin Count |
24 |
Number of Outputs |
8 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Power Supplies |
5V |
Number of Circuits |
1 |
Nominal Supply Current |
85mA |
Power Dissipation |
78mW |
Frequency (Max) |
80MHz |
Family |
7B |
Input |
Clock |
Ratio - Input:Output |
1:8 |
Max I(ol) |
0.046 A |
PLL |
Yes |
Differential - Input:Output |
No/No |
Prop. Delay@Nom-Sup |
0.7 ns |
Propagation Delay (tpd) |
0.7 ns |
Same Edge Skew-Max (tskwd) |
0.75 ns |
Duty Cycle |
50 % |
Height Seated (Max) |
2.667mm |
Width |
7.5057mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
CY7B9910-7SXC Overview
It is packaged using the Tube method since it is a clock IC. Embedded in the 24-SOIC (0.295, 7.50mm Width) package is this Clock PLL. As you can see, it consists of 24 terminations. The clock generator ic should be grounded with a voltage of 5V. In this case, Clock is designed to be the input of the clock generator. A total of 1 circuits are implemented to access the full performance of the electrical part. RF synthesizers based on this clock provide frequencies up to 80MHz maximum. Because of the Surface Mount, clock PLL can be easily mounted on the panel. There should be 4.5V~5.5V provided with this RF synthesizer. Test statistics suggest setting the ambient temperature at 0°C~70°C, which is 0°C~70°C. As the name suggests, this is a clock generator that is compatible with TTL logic levels. It is possible to classify this electronic component as a Fanout Buffer (Distribution), Zero Delay Buffer. It is a 24-bit clock PLL designed specifically for microprocessors. The related electrical components for the base part number CY7B9910 can be found below. There is an available 24 pin on the PLL. The supply voltage should be maintained at 5V for high efficiency. The output frequency can be amplified as high as possible with its 8 signal outputs. At 0.75 ns Max, this analog clock generator exhibits low timing skew. This PLL belongs to the family of 7B.
CY7B9910-7SXC Features
Available in the 24-SOIC (0.295, 7.50mm Width)
Supply voltage of 5V
Operating supply voltage of 5V
CY7B9910-7SXC Applications
There are a lot of Cypress Semiconductor Corp CY7B9910-7SXC Clock Generators applications.
- Frequency shifting decodes
- Reference signals to RF systems
- Motor speed controls
- Carrier synchronization in wired communication
- Various decoding circuits
- Vector network analyzers (VNA)
- Sampling clocks for ADC and DAC
- Mechanical devices
- Myriad digital applications
- Mixed mode (analog and digital) applications