banner_page

CY7B9911V-5JC

3.3V Fanout Buffer (Distribution), Zero Delay Buffer 110MHz CY7B9911 Clock Generators RoboClock+? Series 32 Pins 32-LCC (J-Lead) 32 Terminals Surface Mount 3V~3.6V Tube


  • Manufacturer: Cypress Semiconductor Corp
  • Nocochips NO: 217-CY7B9911V-5JC
  • Package: 32-LCC (J-Lead)
  • Datasheet: -
  • Stock: 456
  • Description: 3.3V Fanout Buffer (Distribution), Zero Delay Buffer 110MHz CY7B9911 Clock Generators RoboClock+? Series 32 Pins 32-LCC (J-Lead) 32 Terminals Surface Mount 3V~3.6V Tube (Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 32-LCC (J-Lead)
Surface Mount YES
Number of Pins 32
Operating Temperature 0°C~70°C
Packaging Tube
Published 1996
Series RoboClock+™
JESD-609 Code e0
Pbfree Code no
Part Status Obsolete
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 32
ECCN Code EAR99
Type Fanout Buffer (Distribution), Zero Delay Buffer
Terminal Finish Tin/Lead (Sn/Pb)
Subcategory Clock Drivers
Technology TTL
Voltage - Supply 3V~3.6V
Terminal Position QUAD
Terminal Form J BEND
Peak Reflow Temperature (Cel) 220
Number of Functions 1
Supply Voltage 3.3V
Base Part Number CY7B9911
Pin Count 32
Number of Outputs 8
Operating Supply Voltage 3.3V
Supply Voltage-Max (Vsup) 3.63V
Supply Voltage-Min (Vsup) 2.97V
Number of Circuits 1
Power Dissipation 104mW
Frequency (Max) 110MHz
Family 7B
Input LVTTL
Ratio - Input:Output 1:8
Max I(ol) 0.035 A
PLL Yes
Differential - Input:Output No/No
Prop. Delay@Nom-Sup 0.5 ns
Propagation Delay (tpd) 0.5 ns
Divider/Multiplier Yes/Yes
Same Edge Skew-Max (tskwd) 0.7 ns
Height Seated (Max) 3.556mm
Radiation Hardening No
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

CY7B9911V-5JC Overview


Clock ICs are packaged using the Tube method. Clock PLL is embedded in the 32-LCC (J-Lead) package. The frequency generator is capable of withstanding a maximum temperature of 220 during reflowing. There are a total of 32 terminations in this file. To operate this time clock generator, 3.3V voltage should be applied. This clock generator receives its inputs from LVTTL, which is designed to be the clock source. An implementation of 1 circuits is required in order to fully utili1e the capabilities of the electrical part. RF synthesizers based on this clock provide frequencies up to 110MHz maximum. The Surface Mount allows this electrical component to be easily installed on the panel. Approximately 3.63V is the maximum supply voltage needed by this time clock generator. This frequency synthesizer requires a supply voltage above 2.97V to be safe. Clock generator ic works with 3V~3.6V. Test statistics estimate a temperature of 0°C~70°C, which should be set as the ambient temperature. An electrical part such as this one can be classified as a Fanout Buffer (Distribution), Zero Delay Buffer component. It is a 32-bit clock PLL designed specifically for microprocessors. CY7B9911 is the base part number for finding related electronic parts. There are 32 pins that are available on the frequency generator. Time clock generator can handle a voltage of 3.3V as the supply voltage. The clock PLL is generally classified as a Clock Drivers device. RoboClock+? series electronic parts are used in this part. 8 signal outputs enable clock PLL to magnify output frequency as high as possible. Low timing skew is provided by this analog clock generator at maximum 0.7 ns. You can find similar electronic components by searching for the 7B family.

CY7B9911V-5JC Features


Available in the 32-LCC (J-Lead)
Supply voltage of 3.3V
Operating supply voltage of 3.3V

CY7B9911V-5JC Applications


There are a lot of Cypress Semiconductor Corp CY7B9911V-5JC Clock Generators applications.

  • MRI
  • DVD add-on cards for multimedia PCs
  • Test and instrumentation equipment
  • Radar
  • Infotainment systems
  • Bluetooth receivers
  • Laptops
  • Fiber Channel
  • Digital logic circuits
  • Ports

Write a review

Note: HTML is not translated!
    Bad           Good