CY7B991V-5JXC
| Parameters | |
|---|---|
| Width | 11.51mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 32-LCC (J-Lead) |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 1996 |
| Series | RoboClock™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | Buffer/Driver |
| Subcategory | Clock Drivers |
| Voltage - Supply | 2.97V~3.63V |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | CY7B991 |
| Output | LVTTL |
| Pin Count | 32 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.63V |
| Supply Voltage-Min (Vsup) | 2.97V |
| Number of Circuits | 1 |
| Nominal Supply Current | 95mA |
| Power Dissipation | 104mW |
| Max Supply Current | 95mA |
| Family | 7B |
| Input | 3-State |
| Ratio - Input:Output | 8:8 |
| Max I(ol) | 0.035 A |
| Differential - Input:Output | Yes/Yes |
| Prop. Delay@Nom-Sup | 0.7 ns |
| Propagation Delay (tpd) | 0.5 ns |
| Duty Cycle | 50 % |
| Height | 2.67mm |
| Length | 14.05mm |
CY7B991V-5JXC Overview
The clock divider is available in 32-LCC (J-Lead) case. It is packaged as a Tube. 32 terminations have been recorded. It is possible to achieve high efficiency with a 3.3V supply voltage. As you can see, it is mounted by Surface Mount. This electronic component falls under the classification of Buffer/Driver. When the temperature is set to 0°C~70°C, reliable performance is ensured. The clock switch should be able to be powered by a 2.97V~3.63V V source. There are 32 pins on the clock buffer. There is an output of LVTTL. A 32 pin is used for operation. There is a family of objects known as the CY7B991. This clock divider?is econtained in Clock Drivers. There is an electronic gadget called 7B in this family. There is a 3.63V maximum supply voltage set (Vsup). The supply voltage (Vsup) should be maintained above 2.97V in order for the clock divider to operate normally. As a default, it outputs 8. The RoboClock? series is the name of this electronic component. It is recommended to keep the supply voltage at 3.3V to maximize efficiency. The frequency 80MHz allows excellent accuracy to be maintained.
CY7B991V-5JXC Features
32 terminations
The operating temperature of 0°C~70°C degrees
Clock Drivers subcategory
at 80MHz frequency
CY7B991V-5JXC Applications
There are a lot of Cypress Semiconductor Corp CY7B991V-5JXC Clock Buffers & Drivers applications.
- Window comparator
- High speed instrument
- High-end consumer electronics
- Computing
- Synchronous optical network (SONET)
- High performance communication system
- Smartphone
- DDR4 JEDEC standard RDIMM design
- Information equipment
- Network
